Redmond Gary Australia Pty Ltd

Trailers / ABC 4-Drum Cable Trailer

RG - ABC 4-Drum

Photo is of 3-Drum ABC Trailer


The 4-Drum ABC (Aerial Bundle Cable) Trailer is supplied with diesel engine to drive the hydraulic power unit and has the capacity to carry 4 drums 1200mm in diameter with a maximum width of 900mm. If there are empty drums between the supports, drums of up to 1600mm diameter can be installed. The trailer is supplied with separate drum modules and main frame. Each of the four drum supports is an individual unit which may be detached from the trailer frame.

Each drum stand is fitted with a removable centre drum spindle and disc brake assembly which enables the operational crew to establish a line pull of up to 200kgs at 1000mm diameter.

The hydraulic power unit enables the operational crew to reel the cable in (or pay out fully controlled) via a hydraulic motor attached to all four drum-stand spindles. It is possible to drive all 4 drum stand spindles simultaneously.

All trailers and modules are fully hot dip galvanised. As a further alternative, this 4-Drum unit can be offered in skid mount form.


  • Max Drum Mass: 1.3 Tonne
  • Max Drum Diameter: 1200 mm
  • Max Drum Width: 900 mm
  • Standard Spindle Diameter: 54 mm
  • Overall Length: 7170 mm
  • Overall Width: 1820 mm
  • Height Loaded (with roller guide stand): 2650 mm
  • Height Unladen (with roller guide stand): 2650 mm
  • Mass Unladen: Approx. 2500 kg
  • Mass Fully Laden (max): 8000 kg
  • Standard Trailer Brake Type (S-Cam air in accordance with ADR62): Air

Parts Books & Operating Instructions

The equipment is supplied with one copy of an operation, parts and maintenance manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.

Change in Specification

Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its' representatives.

Delivery (Manufacturing)

Delivery on these units would be approx. 12 weeks from receipt of written confirmation of order and receipt of deposit. Firm delivery dates will be confirmed on acceptance of order.


Refer to Redmond Gary's standard 12 month guarantee and sales conditions available on request.