Redmond Gary Australia Pty Ltd

Trailers / ABC 2-Drum Cable Trailer

RG - ABC 2-Drum

Note: 3-Drum trailer shown inthe photo above.


1. Series A. The trailer/drum-stand combination style. With this unit the trailer frame is an integral part of the TWO drum stands with the upright drum supports directly attached (welded) to the trailer frame.

2. Series B. The trailer with separate removable drum modules. Each of the TWO drum supports is an individual unit which may be detached from the trailer frame.

The trailer could be supplied with petrol engine to drive the hydraulic power unit if required. The trailer has the capacity to carry ONE, 1600mm diameter drum, or TWO, 1400mm diameter drums. Maximum drum width 900mm.

Each drum stand is fitted with a removable centre drum spindle and disc brake assembly which enables the operational crew to establish a line pull of up to 150kgs at 1000mm diameter.

Specifications for Series B - 2-Drum ABC Trailer

  • Max Drum Mass: 1.3 Tonne
  • Max Drum Diameter:1200 mm
  • Max Drum Width: 900 mm
  • Standard Spindle Diameter: 54 mm
  • Overall Length: 5670 mm
  • Overall Width: 1820 mm
  • Height Loaded (with roller guide stand): 2650 mm
  • Height Unladen (with roller guide stand): 2650 mm
  • Mass Unladen: 1350 kg
  • Mass Fully Laden (max): 3200 kg
  • Standard Trailer Brake Type Electric

Specifications for Series B - 2-Drum ABC Trailer

  • Trailer frame finished in hot dip galvanising
  • Operational controls housed in cabinet located on kerb side of the trailer
  • Engine Cabinet manufactured from 1.6mm zinc anneal sheeting finished with powder coating – all seams and edges are sandblasted, primed prior to powder coating
  • All tanks and hydraulic cylinders finished in 2 pack enamel
  • ADR approved single axle with Electric Brakes (Note: "S" cam air brakes are required for trailers carrying drums heavier than 1 Tonne.
  • Landcruiser Radial Rims, with 7.5 x 16 tyres
  • Wind Down Front Jackleg/Stabiliser
  • Two Wind Down Rear Jackleg/Stabilisers
  • Tow Eye Type - 75mm Ring Type Swivel Tow Coupling
  • Coupling Height - 600 mm
  • Pinlock Endlink Chain Ends
  • 10 hour Fuel Tank
  • LED Lights
  • Safety and Operational Signage - Screen Printed Anodised Aluminium
  • Final Coat Finish. Powder Coating and 2 pack Enamel. Yellow, Interpon, Safety Yellow, Product Code ME096A
  • All electrics 12 volt
  • One set of Operational Manuals

Parts Books & Operating Instructions

The equipment is supplied with one copy of an operation manual which includes operating instructions, safety information, major assembly drawings, hydraulic and electrical schematics (if applicable), etc. Additional copies are available upon request at nominal cost.

Change in Specification

Design and improvement of products is a continuous process. We, therefore, reserve the right to make design improvements differing from this specification after receipt of an order. However, any major changes will only be made with the approval of the customer or its representatives.


12 months parts and labour in accordance with guarantee and sales conditions.